Notes concerning “3-D printing”

• mechanical computation: with Merkle gates, height fields, and thread 2010-06-28 (36 minutes)
• Review notes for Chris Anderson’s “Makers” 2013-05-17 (5 minutes)
• Notes on 3-D printing a mechanical LUT 2014-04-24 (3 minutes)
• Modeling trees with slices containing metaballs 2014-06-29 (updated 2014-07-02) (6 minutes)
• Slotted tape with skewed involute roulette bristles as an alternative to hose clamps and possibly screws 2014-07-02 (6 minutes)
• Heat exchangers modeled on retia mirabilia might reach 4 TW/m³ 2014-07-16 (updated 2019-08-21) (14 minutes)
• We should use end-to-end optimization algorithms for 3-D printing design 2015-09-03 (14 minutes)
• A one-motor robot 2015-09-03 (13 minutes)
• Likely-feasible non-flux-deposition powder-bed 3-D printing processes 2015-09-11 (updated 2019-12-20) (49 minutes)
• Electrodeposition 3d printing 2016-02-19 (4 minutes)
• Flux deposition for 3-D printing in glass and metals 2016-07-03 (15 minutes)
• 2016 outlook for automated fabrication and 3-D printing 2016-08-11 (20 minutes)
• Filling hollow FDM things with other materials 2016-09-07 (5 minutes)
• 3-D printing glass with continuously varying refractive indices for optics without internal surfaces 2016-10-06 (3 minutes)
• Jello printing 2016-12-14 (8 minutes)
• Wang tile addition 2017-02-16 (3 minutes)
• 3-D printing by flux deposition 2017-02-24 (updated 2019-07-27) (21 minutes)
• Vibratory powder delivery 2017-02-25 (2 minutes)
• Approaches to 3-D printing in sandstone 2017-08-03 (5 minutes)
• Maximal-flexibility designs for printable building blocks 2019-04-20 (18 minutes)
• Cold plasma oxidation 2019-05-01 (updated 2019-08-21) (7 minutes)
• Needle binder injection printing 2019-08-05 (updated 2019-12-30) (12 minutes)
• Sulfuric acid dehydration printing 2019-12-18 (updated 2019-12-19) (3 minutes)