Notes concerning “Manufacturing”

• Polycaprolactone 2007 to 2009 (3 minutes)
• Review notes for Chris Anderson’s “Makers” 2013-05-17 (5 minutes)
• Notes on 3-D printing a mechanical LUT 2014-04-24 (3 minutes)
• 2025 manufacturing and economics scenario 2014-04-24 (24 minutes)
• Comparison of the PCO-1810 and PCO-1881 plastic bottlecap standards 2014-05-25 (updated 2016-07-27) (2 minutes)
• We should use end-to-end optimization algorithms for 3-D printing design 2015-09-03 (14 minutes)
• Simplified computing, down to the level of mining raw materials 2015-09-03 (22 minutes)
• A hand-powered computer? 2015-09-03 (updated 2017-07-19) (11 minutes)
• Hot wire saw 2015-12-28 (updated 2019-06-02) (10 minutes)
• 2016 outlook for automated fabrication and 3-D printing 2016-08-11 (20 minutes)
• Prototyping stuff 2016-08-11 (1 minute)
• Regenerative fuel air cutting 2016-09-06 (4 minutes)
• Soldering with a compound parabolic concentrator or even just an imaging lens 2016-09-07 (2 minutes)
• Filling hollow FDM things with other materials 2016-09-07 (5 minutes)
• Laser ablation of zinc or pewter for printed circuit boards 2016-09-19 (4 minutes)
• Spark particulate sieve 2016-10-06 (updated 2016-10-11) (7 minutes)
• Topics to study in 2016 2016-10-27 (updated 2016-11-15) (37 minutes)
• Self replication changes 2017-01-16 (5 minutes)
• Servoing a V-plotter with a webcam? 2017-02-16 (3 minutes)
• 3-D printing by flux deposition 2017-02-24 (updated 2019-07-27) (21 minutes)
• Vibratory powder delivery 2017-02-25 (2 minutes)
• How cheap can laser-cut boxes be? 2017-06-01 (2 minutes)
• Approaches to 3-D printing in sandstone 2017-08-03 (5 minutes)
• Hammering toolhead 2017-08-18 (6 minutes)
• A brief note on autonomous cyclic fabrication systems from inorganic raw materials 2018-04-27 (1 minute)
• Ideas to pursue 2018-05-05 (updated 2018-08-16) (6 minutes)
• UHMWPE clothes could be lightweight and sturdy 2018-06-05 (3 minutes)
• Electrolytic anodizing, with a small movable electrode 2018-10-28 (2 minutes)
• Single-point incremental forming of aluminum foil 2019-03-11 (updated 2019-06-10) (14 minutes)
• Elastic metamaterials 2019-03-19 (17 minutes)
• Gardening machines 2019-04-02 (updated 2019-04-24) (32 minutes)
• Caustic business card 2019-04-08 (3 minutes)
• Maximal-flexibility designs for printable building blocks 2019-04-20 (18 minutes)
• Cold plasma oxidation 2019-05-01 (updated 2019-08-21) (7 minutes)
• Things in Dercuano that would be big if true 2019-05-24 (updated 2019-08-21) (24 minutes)
• Induction kiln 2019-06-02 (19 minutes)
• Drone cutting 2019-06-11 (12 minutes)
• Cardboard furniture 2019-08-01 (updated 2019-08-11) (15 minutes)
• Needle binder injection printing 2019-08-05 (updated 2019-12-30) (12 minutes)
• Printed circuits on fired-clay ceramic 2019-08-13 (11 minutes)
• Harmonic motion chain robot 2019-08-16 (2 minutes)
• Gold leaf trusses 2019-08-31 (11 minutes)
• Expanded mineral beads 2019-10-01 (12 minutes)
• Bistable magnetic electromechanical display 2019-10-24 (16 minutes)
• Fabric optimization 2019-10-28 (updated 2019-10-29) (17 minutes)
• Hot lye granite cutting 2019-11-01 (2 minutes)
• Shaped hammer face giant pressure 2019-11-10 (21 minutes)
• Incremental roller comb forming 2019-11-27 (4 minutes)
• Berlinite gel 2019-12-14 (updated 2019-12-15) (10 minutes)
• Nomadic furniture optimization 2019-12-15 (2 minutes)